User Tools

Site Tools


notepad_for_mesh

This is an old revision of the document!


Notepad for Mesh stuff

Only a scratchpad, for a new howto FIXME

* Before you start: Place all files located in this URL: http://piratebox.aod-rpg.de/mesh_test/ to your usb-stick (in no subfolder).

* This should contain the following at least files:

  • forban_img.tar.gz
  • piratebox_0.6.1_all.ipk
  • piratebox_ws_0.6_img.tar.gz
  • piratebox-forban_0.34.1_all.ipk
  • piratebox-mesh_0.2.7_all.ipk

* Then you follow the Howto of David Darts http://wiki.daviddarts.com/PirateBox_DIY_OpenWrt BUT Instead of:

     cd /tmp
     wget http://piratebox.aod-rpg.de/piratebox_0.5.1_all.ipk
     opkg update && opkg install piratebox*

* DO THIS (only needed while beta) for install piratebox >= 0.6.0 :

     cd /tmp
     mount /dev/sda1 /mnt
     cp /mnt/piratebox_*ipk /tmp
     umount /mnt
     opkg update && opkg install piratebox_0.6.1_all.ipk
     cd /mnt/usb

* Check time & Activate Timesave scripts:

      /opt/piratebox/bin/timesave.sh /opt/piratebox/conf/piratebox.conf  install

* install Mesh-Stuff

opkg install piratebox-mesh_0.2.7_all.ipk
/etc/init.d/mesh init
/etc/init.d/mesh enable

* install forban

opkg install piratebox-forban*

* reboot

* device is getting slow now. Wait until it is okay again. If you are able to SSH

you can check  and the first value at load average should drop below 1.0
can take around 5 Minutes
notepad_for_mesh.1358601658.txt.gz ยท Last modified: 2013/01/19 13:20 (external edit)